Fin Collector
Field of application
It is fitted with fin former that is used for collecting auto- matically the rolled fin and store them in a special pallet to be packed for core building. In this way the core building could finish the packing of all fin in one time that improve the efficiency obviously.
Main Technical Parameters
| Fin size | According to user’s products |
| Fin strips collected per time | 1 |
| Collecting speed | To be fitted with speed of fin distributing |
| Collecting way | Automatic |
| Occupied area | 3500mm(L) x 200mm(W)x1000(h) |
PF- Condenser header cover presser
Field of application
It is used to press the covers to two header f assembled PF-condenser heade.
The 4 pressing blocks could suck air for pressing the covers tightly (imported vacuum pump) Pressure indicating with scope should be adjustable.
Main Technical Parameters
| Capacity | 650pieces/8 hour |
| Parts size | Ф20 ~Ф30dia. header |
| scope in length direction | 300 – 800mm |
Single Mould for punching evaporator plates
Field of application
The mould is composed of evaporator plates pressing die, inlet/outlet tube punching die, side plate punching die as well as cover board punching die for punching the above components separately.
Main Characteristics:
Lower invest cost, high precision die, better plates forming and long life.
Vertical core building machine for evaporator
Field of application
It is a special equipment for core building of evaporator for automobile airconditioner.
Main Characteristics:
One workpiece shall be clamped for each cycle. Front door is available to avoid core from protruding during building so that the component quality is guaranteed, as well the safety of operator. The structure of the equipment is simple and operation is easy. The electric control system, sensors as well as executing elements are all imported from Japan. And pneumatic control driving is adopted for the equipment.
Main Technical Parameters
| capability | 1piece |
| building speed | 30s/per |
| Size to be builded | Confirmed by customer |
| Total weight | 1000kg |
| Overall dimension | 1400mm(L) x 700mm(W) x 2440(H) |
Core building machine for evaporator
Field of application
It is used to assemble the plates and fin of evaporator.
Main Technical Parameters
| Components assembled per time | 1 |
| Max.core size | As customer’s requirement |
| Working table form a 60 angle with horizontal for easy operation 300mm space at both side of working table should be available for putting components. | |
| Overall dimension | 1500mm(L) x 800mm(W) x 2000mm(H) |
- Fin Mill machine
- PF-condenser Collector tube Processing Unit
- Collector tube Former Equipment
- Collector Tube Forming Dies
- Highspeed Straightening and Cutting Machine
- Straightening and Cutting Machine
- Straight Aluminum Multi-orifice Tubes Cutter
- Aluminum Multi-orifice Tube Shrinking Machine
- PF- Condenser Building Machine(Automation)
- Semi auto bender for serpentine heat exchanger
- Core building for condenser (A B)
- Core building for condenser
- PF- Condenser frame Building Machine
- Fin Collector
- PF- Condenser header cover presser
- Single Mould for punching evaporator plates
- Vertical core building machine for evaporator
- Core building machine for evaporator
- Surface Treating Line
- Assembling table for serpentine condenser
- Dies for Header and Bracket
- Radiator Tube Cut-to-Length