Highspeed Straightening and Cutting Machine
Field of application
The equipment is used to straighten, cut as well as pull apart of coiled aluminum multi-orifice tube into set length straight tube.
Main Characteristics:
The feeding unit of the equipment applies serve motor as driving to drive ballscrew to achieve fast feeding with high precision less than ±0.25mm. The cutter for cutting to length is also driven by servo motor through ballscrew with precision of length setting less than ±0.1mm. The control interface adopts touch screen for easy operating with size setting,speed adjusting and direct indicating running status.
Main Technical Parameters
| Working Speed | 1.5s/per tube( basing on 600mm length) |
| Tubes to be cut each time | 2 tubes |
| Material scope appliable for Thickness of tube: | 1.5-3mm |
| Material scope appliable for Width of tube: | 12-30mm |
| Scope of length to be cut | 300 – 900 mm |
| Length precision to be cut | < ±0.5mm |
| Straightening precision Width direction: | <0.4min/800mm |
| Longitudinal direction: | <0.8min/800mm |
| Time for replacing one new coil | ≤3-5min |
| Time for changing cutting width | 10 ~ 15min |
| Time for replacing blade | ≤3-5min |
| Total power | 9.7KW |
| Occupy area | 17000mm(L) x 2500mm(W) x 1700mm(H) |
Straightening and Cutting Machine
Field of application
The equipment is used to straighten, cut as well as pull apart of coiled aluminum multi-orifice tube into set length straight tube.
Main Technical Parameters
| Material appliable for : | W16 ~ 22 x 12 ~3mm |
| Coils appliable for Max. | outer dia: Φ1100mm |
| Coils appliable for Max. | Inner dia. Φ500 ~550mm |
| Scope of length to be cut | 300 – 900 mm |
| Cutting speed | 2 tubes/6seconds; (L=500mm) |
| Length precision to be cut | < ±0.5mm |
| Straightening precision | Width direction: <0.4min/800mm |
| Longitudinal direction: <0.8min/800mm | |
| Power | Pneumatic |
| Total weight | 3100kg |
| Occupy area | 14000mm(L) x 1700mm(W) |
Straight Aluminum Multi-orifice Tubes Cutter
Field of application
The equipment is used to cut the straight aluminum tube into required length.
Main Characteristics
It is flexiable to use with cheap price.
Aluminum Multi-orifice Tube Shrinking Machine
Field of application
The tube is fed manually to shrink twice for two ends.
Main Characteristics
It is convenient to use with simple structure and low price.
Aluminum Multi-orifice Tube Shrinking Machine
Field of application
The equipment is used to shrink the two ends of straight tube for following assembly process.
Main Characteristics
| Material width appliable for | 15 ~25mm |
| Material thickness appliable for | 1.8 ~3mm |
| Materiallength appliable for | 300 ~ 900mm |
| End shrinking depth | 0.20 ~0.30mm |
| Shrinking speed | 1.5s/tube |
| Power | Pneumatic |
| Total weight | Around 1300kg |
- Fin Mill machine
- PF-condenser Collector tube Processing Unit
- Collector tube Former Equipment
- Collector Tube Forming Dies
- Highspeed Straightening and Cutting Machine
- Straightening and Cutting Machine
- Straight Aluminum Multi-orifice Tubes Cutter
- Aluminum Multi-orifice Tube Shrinking Machine
- PF- Condenser Building Machine(Automation)
- Semi auto bender for serpentine heat exchanger
- Core building for condenser (A B)
- Core building for condenser
- PF- Condenser frame Building Machine
- Fin Collector
- PF- Condenser header cover presser
- Single Mould for punching evaporator plates
- Vertical core building machine for evaporator
- Core building machine for evaporator
- Surface Treating Line
- Assembling table for serpentine condenser
- Dies for Header and Bracket
- Radiator Tube Cut-to-Length